Steel wire braided rubber hoses have excellent corrosion resistance and wear resistance. Due to their compact structure and light weight, they improve installation convenience, save maintenance costs and time, and enable them to operate well under various process conditions. There are multiple types on the market that can be selected based on usage.

1、 Characteristics of rubber hose

1. The rubber hose is made of special synthetic rubber, which has excellent oil resistance, heat resistance, and aging resistance.

2. Rubber hoses can withstand high pressure and have good pulse performance.

3. The tube body is tightly combined, soft to use, and has minimal deformation under pressure.

4. Rubber hoses have excellent resistance to bending and fatigue.

5. Large length, ranging from 32 to 20 meters, 25 to 10 meters, and even over 100 meters.

2、 Precautions for installation and use

Steel wire braided rubber hoses have excellent weather resistance and are fastened together with steel joints through specialized equipment to form high-pressure rubber hose components. They have good product characteristics and should be installed and used with the following precautions:

1. Heat sources should be avoided as much as possible. If necessary, insulation boards can be assembled to prevent the hose from overheating and deteriorating at high temperatures.

2. Avoid surface friction: Do not come into contact with other pipelines during installation and use to prevent cracks caused by friction. When crossing or rubbing occurs after work, protective equipment should be used.

3. When bending, attention should be paid to the radius size to avoid damage to the pipe body due to a too small radius.

4. During installation, a length allowance should be left, and there should be no relative movement on both sides to maintain the looseness of the rubber hose.

5. During the use of the equipment, prevent deformation of the rubber hose, even slight deformation can lead to a decrease in strength or loose joints.

6. If the core components are equipped with rubber hoses, it is recommended to maintain and replace them regularly.

The selection of rubber types for steel wire braided rubber hoses has a significant impact on the product, which can be divided into inner rubber layer, middle rubber layer, and outer rubber layer, each made of different types of resin. The appearance of the rubber hose produced by the soft core method is smooth and bright, the specifications and dimensions are accurate, the performance is stable, and it is longer than the rubber hose produced by the hard core method. It is suitable for producing large length rubber hoses with a diameter less than 38 millimeters. The production length of the hard core method is limited, the production efficiency is low, and it is difficult to achieve automation and continuity of production. But the product quality is relatively stable, the hose size is accurate, and the performance is guaranteed.